Oil Rig Day
 

Drilling & Completions

The inherently damaging effects from the processes of drilling and completions often inhibit the performance of new wells. These damage mechanisms can leave wells with high initial drawdowns and skins that are preventable with the proper application of PIC's SafGuard chemical technologies. The SafGuard program protects those valuable assets and reserves by allowing operators to confidently and safely, drill and complete the most challenging reservoirs while limiting the risk of damaging or restricting the well's initial performance.

Drilling Products
 
Weighted and Viscosified Brines
Brine Systems

Full range density design with viscosity control to match any situational need.


Solids-Free Gel Pills
SafeGel®

Aqueous linear or crosslinked gels that are fully compatible with all brine compositions. Can include internally mixed breakers with delayed chemistry or exteranlly added breakers. Breakerless, biodegradable, foodgrade and crosslinked starch gels are available that slowly degrade leaving only the base completion fluid.
SafeGel® TDS


Lubricants 
VersiGlide

Lubricant system designed to be added into aqueous systems. Significantly reduces the experienced torque and drag forces exerted on subservice strings. 


UniGlide

A universal lubricant compatible with oil and water-based systems. Particularly effective in mixed fluid applications such as coiled tubing drillouts.

Completions Products
 
Formation Damage Prevention
CalSaf® 

For the treatment of high alkaline brines to remove the risk of calcium precipitation.
CalSaf® TDS


Saf-C-H20®

A seawater treatment consisting of a blend of antifoulants to control scale and MIC development when using seawater for operations.
Saf-C-H20® TDS


BrinFlo

Brine recovery additive. Compatible with all brine systems. Greatly reduces the occurance of irriducable water saturation and increases the mobility of heavier brine systems. 


MoreFlo-FC

Fluid specific, customized filtercake removal systems. Formulated to uniformly attack, breakdown and remove filtercakes caused by both oil-based and water-based drill-in fluids.


Wellbore Cleanup / Filtration Aids
NoDope

High flash point, biodegradable pipedope solvent that readily removes excess or intrusive pipedope products from tubulars, screens and formation faces. Contains no BETX. 


SafeGel®

Aqueous linear or crosslinked gels that are fully compatible with all brine compositions. Can include internally mixed breakers with delayed chemistry or exteranlly added breakers. Can be weighted and chemically treated to minimize gel stage volumes and interfaces thereby reducing rigtime and waste generation. 
SafeGel® TDS


DynoWash™ and DynoWash™ Gel

High performance micellar system that simultaneously encapsulates oil wet debris and strips the oil wet coating from reservoir and pipe surfaces. This allows for the restoration of ideal water-wet conditions. 
DynoWash™ TDS
DynoWash™ Gel TDS
Conventional Acid Packages


DynoFloc

Floculation system designed to clarify and recondition utilized completion fluids following wellbore or reservoir
interactions. Can greatly increase the filtration efficiency of aqueous fluids.


Packer and Suspension Fluids
ProtecAll

Fluid additives for tubular and pipe protection. Includes EPA registered biocides, corrosion inhibitors, and oxygen scavengers. 

PIC Chemicals
1306 S. Cherry St.
Tomball, TX 77375 USA
LinkedIn
YouTube
Copyright 2021 © PIC Chemicals | Privacy Policy